Having a GoPro Hero3+ Black and comparing it to my Contour cameras the audio out of the box is anything but good. Quite sad as the camera otherwise is great…
As I want to use it for when I’m out and about I needed a solution for audio that meant not bringing something big and bulky like my Rode Videomic Pro. I Googled a lot and found this small mic from Edutige, ETM-001. The mic is omni directional which means that it’ll pick up audio basically from all directions. And it’s a stereo mic. Some will probably argue that it’s better with a shotgun-like microphone as the audio is only picked up from the direction that the mic is facing, hence removing a lot of background noice. And there are microphones for that too in the same size as the ETM-001.
As the new GoPro’s don’t have a 3.5mm jack anymore like the Hero2 you need a adapter cable for it to work that connects via mini-USB. I didn’t want the mic to just be hanging from the camera body I needed something to hold it in place. At first my plan was to glue it to the GoPro Frame and/or the waterproof body but then I couldn’t use it stand-alone with the camera or if it breaks you’ll have to replace it and that will be quite hard so that plan went out the window. I tried a few different places before I saw that the USB-adapter had a part that wasn’t flat but rather rounded where the 3.5mm jack could be glued and fixed in to place.
This is the final result! Works like a charm! I want to get a deadcat (windscreen) for the mic too but I guess that will be a problem. I don’t want anything showing up in the bottom left corner of the picture. I haven’t tried every video setting but 1080p works but 2.7k wide shows the windscreen. I guess that if I don’t use it the problem will be solved. However I nearly ever shoot in 2.7k wide other than for timelaps and stuff where I don’t need sound so for me that’s not an issue. If this is not the case for you then this particular mod won’t work. If you place your adapter so that it’s aligned with the USB-plug it won’t be seen in 1080p at least.
Made a short timelaps where you can see the mic in the bottom left corner of the screen in 2.7k wide.
Here’s a short video in 1080p and you can see a little bit of the windscreen at the bottom. So if I just make a small adjustment on the image crop it won’t be there and I won’t be loosing much of the picture anyway. If you make yours so that it’s aligned with the USB-plug you won’t have my issue. I bought 3 of these USB-adapters so if I get annoyed with this I’ll just make a new one. You can find them really cheap on eBay like four dollars a piece, just follow the link above. Make sure to buy the one that’s not a 90 degree angle USB-adaptor because that one is all flat on the USB-plug and gluing the 3.5mm jack to it will be harder, but not impossible.
Looking through all my test footage I can see that I don’t have this issue with the windscreen showing in all my videos. I guess that the windscreen just came of the mic just a little sometimes. But like I suggested, glue it so that it sits aligned with the USB-plug and you’ll be just fine!
Hopes this helps 🙂
Thanks for reviewing …
Seems this is the best mic you can grab for Gopros … Small , powerful and at a realy good price.
Will get mine soon…;))
Yes it’s great for the small price you pay.